Grip Heating System Deluxe Kit

Grip Heating System Deluxe Kit

In stock
Part #:GSD
Project Difficulty:1/5
Remarks: 5 year warranty heating cartridges
Country of Manufacture: Germany

Grip heating system for handlebars with electronic power control

Guaranteed Fit.
Our products are curated by our experts.
We're Happy to Help!
Call our experts: 937-291-1735
Easy Returns.
We are ready to assist you promptly.

Grip Heating System Deluxe Kit

The Deluxe system takes comfort to the next level.  The 5 step power control unit, single push button, and LED bar graph display allowing you to easily control your comfort with the push of literally one button.  Changing your comfort level never became so easy.  Additionally, the power control unit is compatible with other heated sports gear, heated seats, etc., and the power control unit has memory feature to save your settings from the last ride.

One set of heating cartridges for the handlebar including electronic power control unit.

CoolRide has designed a set of heating cartridges which are mounted inside the handlebar.

The Grip Heating Deluxe comes with one of the best power control units. The PCU-5 with 5 step power control, single push button operation, and an elegant LED Indicator. This power control unit coupled with the push button, has 5 different settings that can be selected on the fly providing more comfort as the weather conditions change.

This superior heating system offers the following advantages:
• Invisible installation
• Powerful
• Crash proof
• Completely free of wear
• No messy cables, different from heated gloves or hot grips
• No negative safety impact
• Electronic power control Reliable & permanent (5 years warranty)
• Highly flexible FEP (Fluorinated Ethylene Propylene) cables that withstand temperatures from -58°F to +406°F, 1,200mm (47.2 Inches) long
• Monolithic design, vibration proof
• Rock solid cast material with optimized thermal conductivity

Fits on almost all motorcycles. Before purchasing: Please read the installation instruction and our FAQ sections on our web page! Please check if installation is possible with your specific motorcycle! Things like welded-in weight bars, guiding pins or other stuff that blocks the space inside the handlebar tube has to be removed before the cartridges can be glued in.

We offer all technically feasible sizes. If you need something beyond our standard portfolio or special order, please do not hesitate to contact us!

The whole grip heating system is hand-made in Solingen, Germany home of world famous cutlery.

The most common questions are answered in our FAQ section. We are also happy to help by e-mail or phone!

Scope of Supply

• 2 heating cartridges 90 mm long, 26 Watt each = 52 Watt system power
• Power cords made from cold flexible and heat resistant FEP, 1,200mm (47.2 inches) each
• 1 power control unit
• 1 push button
• 6 fitted isolating spacer discs
• 1 rubber grommet
• 4 complete bullet style connectors with insulation sleeves
• 1 package 2-component adhesive, heat-resistant
• 1 installation instruction for heating cartridges
• 1 installation instruction for power control unit


Select the diameter of the heating cartridges to ensure a snug fit in the handlebar. The size you need to order is the inner diameter of your handlebar rounded down to full mm.

17.9mm inner diameter = order size 17mm.
17.0mm inner diameter = order size 17mm.
16.9mm inner diameter = order size 16mm.

Installation preparation

To mount handlebar end weights or hand guards the heating cartridges feature a M6 or M8 thread.

Control device

For all of the power control units you may select between a waterproof (IP67) push button for panel mounting. This requires a 12mm bore hole in the motorcycle's fairing, cockpit or a holder (not included) made from sheet metal. For naked bikes we recommend the Holder Kit, with which the push button can be attached to the mirror terminal or clutch lever.