Power Control Unit PCU-5TC Kit

Power Control Unit PCU-5TC Kit

In stock
Part #:PCU-5TC
Project Difficulty:1/5
Country of Manufacture: Germany

Smart, Small, Self-Adjusting electronic controller

Guaranteed Fit.
Our products are curated by our experts.
We're Happy to Help!
Call our experts: 937-291-1735
Premium Products.
Made in USA and Europe.

Power Control Unit PCU-5TC Kit

5-step, digital power control unit with temperature control for the grip heating systems and other warming equipment.
Automatic temperature control: The temperature control feature responds to changing air temperatures. This ensures a constant comfort level for the rider. When air temperature drops, power level increases automatically. If the temperature rises again, power level decreases accordingly. You can monitor this automatic behavior via the LED Indicator. However, you still need to select the basic power level that matches your need. The electronic can't know how quickly you start freezing or if you wear thin or well insulated gloves. But it compensates temperature changes during your ride and in doing so reduces the need for manual control of the power level greatly. The automatic temperature control adjusts the power level in 10 steps.

Puristic control concept, a single push button activates the device and alters power levels.
Power level indicated by LED Indicator. The power control unit works with all common hot grips. Extremely high power rating of 180W @ 12V resp. 216W @ 14,4V. This is more than enough to supply 2 of the grip heating systems in parallel or a complete electrically heated rider suit.

This unique product represents CoolRide’s complete Know-How in the field of electric warming equipment for motorcycles. CoolRide has managed to transfer the philosophy without compromise of the heating cartridges on electronic power controllers, too.

Top Features:

• 5 Years warranty!
• Auto Temperature Control: Counterbalances changing air temperature during your ride.
• For CoolRide grip heating systems, hot grips, heated powersports gear, heated seats and more.
• Variable pre-heating phase (0-15 min 100 % power)
• Memory feature saves setting from last ride
• Integrated electronic relay allows operation at modern motorcycles with current control circuits
• Premium look through anodized aluminum + laser engravement
• Discrete & elegant LED Indicator Easy installation and control
• Short circuit and over-temperature protection
• Error indication via flash codes
• Auto-reset of protection circuit
• High-grade black cable, flexible even at low temperatures
• LED Indicator adopts to slightly curved shapes
• Push button and LED Indicator can be displaced by connectors
• Waterproof according to IP67 (except for power outlets)
• Modular concept, replace push button against touch sensor at any time
• Protected against wrong polarity of supply leads
• Excellent EMI compatibility, reliable operation also on problematic bikes
• Easy installation and control

Control / mounting:

Power control units come with a waterproof (IP67) push button for panel mounting. This requires a 12mm bore hole in the motorcycle's fairing or cockpit. For naked bikes we recommend the Holder Kit, with which the push button can be attached to the mirror terminal or clutch lever.