motoscope mini

The motoscope mini is a highly compact digital instrument for motorcycles. The LED display we created for the motoscope mini is unique in the instrument realm. 251 ultra bright LEDs provide for an essentially rimless and extremely readable display surface which can entirely be used for the display of readings. This intricate and innovative technology combines a maximum of display surface with minimal casing dimensions.
The unadorned and elegant design of the motoscope mini and its high class appearance fits every bike, trike or four-wheel vehicle. Exposed mounting can reinforce style and looks, but it might just as well be installed more discretely and 'clean' - with the mini, everything is possible!

The high-quality aluminium casing is machined from solid metal and its surface is black anodized. The mirror polished variant has its own appeal. Electronics come completely moulded-in and are immune to weather, water, dust and vibrations.

The innovative, ultra bright 251-LED dot matrix shows the engine speed in a scalable horizontal bargraph and all other features as easily readable numeric values. With the push of a button, the engine speed can be displayed as numerical value (rpm) as well.
For optimal readability in dark, sunlight and dawn conditions, the LED luminosity varies automatically.
Specific engine speed thresholds can be programmed for the display to show the maximum permissible engine speed ('red zone') or a gear shift light with all LEDs pulsating simultaneously.

The kicker: The display of the motoscope mini not only displays numeric values from left to right but from top to bottom as well. Thus, the instrument may also be mounted vertically!

You can toggle between the different informations on the LED display by operating the provided menu push-button or e.g. the headlight flasher push-button on the handle bar.
By default, the display shows the speed value. Other values may be displayed via push-button operation if needed. A feature for automatically switching back to the speed value after a predetermined time or leaving the manually chosen value on the display is provided.
Default settings or recorded values are of course stored even with the power supply switched off.

Due to its compact dimensions, the motoscope mini is easily mounted just about anywhere on any vehicle. Single mount on your triple clamp or right onto the handle bar, embedded into already present instrument panels, into the tank or FBE - this instrument is applicable anywhere.
We offer universal mounts as well as brand specific solutions e.g. for Buell (TM) or Harley-Davidson (TM). Please refer to "Brackets"

Electrical safety is just one of the motoscope mini's many positive features. A working voltage of 7 V is already sufficient in order to operate the device and operation is ensured up to 18 V. Should over-voltage occur, this is intercepted automatically before it harms electronics. The instrument is therefore over-voltage protected. Furthermore, the device features protection against reverse polarity.

Hassle-free wiring and the detailed installation and operating instructions enables even users without any previous experience in handling the vehicles electrical system to connect this instrument .
The supplied speedometer sensor in stainless steel is very small (M5/25 mm). The 1.5m (6 ft) connector cable easily connects it to the front or back wheel. This permits easy conversions of originally mechanical speedometer drives.

The motoscope mini is compatible with various original speedometer sensors (reed contact and proximity sensors) used by motorbike manufacturers. In these cases, only the terminals have to be connected while the installation of mechanical sensors will be completely obsolete.
An intelligent 'teaching' function provides for easy speedometer calibration - even in cases of vehicles with sensors at the gear box.

Casings are available in black and mirror polished.

When combining the motoscope mini with the genuine CDI ignitions (capacitor discharge ignitions) often found Enduros, Quads and two-stroke engine vehicles, it may be necessary to use an additional ignition signal sensor. This sensor is available in the category 'Instrument Accessories'.

• length/width/height: 59 mm/21,5 mm/13 mm
• weight: approx. 32 g
• threaded fastening bores: 2 x M3
• current consumption: approx. 100 mA
• operating voltage: 7 V - 18 V
• operating temperature: -20°... +80°C

  Function	Measurement range
  Rev counter (LED band)	0 – 6/ 8/ 10/ 14/ 16 krpm
  Rev counter (numeric)	0 – 20 krpm
  rpm threshold/gear shift light	0 – 20.000 rpm
  Speedometer	0 – 999 km/h oder mph
  trip odometer	0 – 999,99 km oder mi
  total odometer (adjustable)	bis 99 999 km oder mi
  trip time	0 – 99:59 h/min

  
  
  Scope of Supply:
  The kit includes one motoscope mini with an approx. 50 cm (20") long connection cable, a 6-terminal plug kit, one speedometer sensor (M5, stainless steel) with a 150 cm (6 ft) long connection cable, 2 strong neodymium magnets, a mini push button, bolts and washers, a load resistor for OEM-speedometer sensors, and a detailed installation and operating manual.