motoscope tiny Vintage (mst)

in motogadget

motoscope tiny Vintage (mst)

in motogadget
$353.00
In stock
Part #:MG5001015
Project Difficulty:1/5
Country of Manufacture: Germany
Model: *Any
Remarks: brass
brass housing, brass bezel
authorized distributor
motogadget
Guaranteed Fit.
Our products are curated by our experts.
Free Shipping!
On US orders $300 and over.
We're Happy to Help!
Call our experts: 937-291-1735
Premium Products.
Made in USA and Europe.

motoscope tiny Vintage

The motoscope tiny vintage is a small, analogue speedometer with a brass bezel in an appealing 'old school' look.

The design is different, but technically it is identical to the motoscope tiny. The dial is based on the streamline design of the 40's and 50's. Additionally, it features a yellowed and crackle surface giving the dial its extremely aged look.

The bezel and indicator are made from solid brass and have been manually coated with patina. The created patterns and signs of aging vary with each instrument and give it an individual and unique look.

There is a special matching Streamline Cup available for the mst Vintage - made from solid brass with a patina. Refer to "Brackets".
Like the motoscope tiny it measures the speed digitally and indicates it precisely with a stepper motor and a pointer.
The installation diameter of 49 mm (1.93”) and the installation depth of only 24 mm (1”) provide various installation options.

The sophisticated technology provides for a classic look without compromise. The dial completely does without display sections or LCD and has a convincing classical look. The ideal solution for purists and minimalists.


Casing

The high quality aluminum casing is machined from solid metal. The casing is 100% water-tight and resistant to vibrations.


Dial and Display

The innovative LED display is hidden behind the black part of the dial and only visible through the dial while operating, not when switched off!

The LED luminosity is automatically adjusted to achieve optimal readability in dark, sunlight and dawn conditions.

If the speed exceeds the 200 km/h (or 200 mph) on the analogue scale, it is automatically displayed in the LED display. The maximum speed is recorded as well

The 4 indicator lights (blue, red and 2 x green) are also integrated into the dial. These lights are only visible when operated, too.


Operation

You can toggle between the different information on the LED display by operating the supplied menu push-button or e.g. the headlight flasher push-button on the handle bar.

Default value on the display is the time. If needed, a short actuation of the push-button will display the values of total distance, day trip, on-board voltage etc.

All functions are easy to operate with the push-button, e.g. day trip, reset or the like.

Default settings or recorded values are of course stored even with the power supply switched off.


Installation

The motoscope tiny / vintage is easy to install with the two M3 threaded holes on the back side.

There are various motogadget brackets available for installation. Refer to "Brackets".


Connection and Sensors

The detailed installation and operating instructions (refer to "Downloads") help with the connection of instrument even for users without any previous experience in handling the vehicle's electrical system.

The supplied speedometer sensor in stainless steel is very small (M5/23 mm) and therefore easy to hide. The sensor can be easily installed on front or rear wheel with the connector cable (1.5 m long). This allows for the easy conversion of an originally mechanical speedometer drive on a motorbike.

The motoscope tiny is compatible with various original speedometer sensors (dry reed contact and proximity sensors) of the motorbike manufacturers. In this case, the terminals have to be connected only and the mechanical sensor installation will be completely obsolete.

An intelligent 'Teach Function' allows for the easy calibration of the speedometer - even on vehicles with transmission sensors, e.g. Harley-Davidson (TM).


Parts Included

• Instrument with approx. 75 cm (29.5”) connector cable
• Mini push-button
• 2 removable fuses
• 9 cable end connectors
• Speedometer sensor (M5 x 0,5 fine-pitch thread stainless steel, IP 68) with 150 cm (59”) connector cable
• 2 powerful neodymium mini magnets
• 2 mounting screws M3 with washer
• 2 diodes for pairing of turn signals
• Detailed installation and operating instructions


Specifications and Features

• Mounting diameter: 49 mm
• Weight: approx. 96 g
• Mount: 2 x M3 threaded hole
• Power consumption, operating: approx. 200 mA (load dependent)
• Operating voltage: 9 V - 15 V
• Operating temperature: -20... +80 °C

 

Feature

Measuring range

Speedometer, analogue (indicator)

0 – 200 km/h or mph

Speedometer, numeric (LED display)

200 – 999 km/h or mph

Max. speed

0 – 999 km/h or mph

On-board voltage

9 – 15 V

Clock

00:00 – 23:59

Trip meter

0 – 999.9 km or mi

Total distance (adjustable)

99999 km or mi max.

Indicator lights

turn signal, high beam, neutral, hazard light

To make the installation of the mst vintage easier on newer (2004 and up) Harley-Davidson models with CAN Bus technology look at the motogadget m.CAN adapter

To connect the mst vintage to one of the newer Triumph Twin or Triple models with CAN Bus technology check out the m.TRI from motogadget in the m.gadget section. Choose your model and year.

Please see also the perfect matching 'vintage cup' to install this speedo.

If you experience any issues placing an order, please call us at (937) 291-1735.