Finally and exclusively available at motogadget – the mo.tri signal adapter for Triumph Twin models with CAN bus technology!

In the past, it was not possible to remove the original instruments on the Triumph Twin models (years 2011 to 2015, air cooled models) and there was no way to operate a motogadget instrument.

Once the bulky original instrument was disconnected, the built-in CAN bus of these models instantly became inoperative. No mods were even possible.

The solution – specially designed for use with Twin models – has arrived: the mo.tri, exclusively from motogadget.

The mo.tri not only provides engine speed and ground speed, but also the signals for the indicator lights: left/right turn signal, low fuel indicator, error memory, high beam, neutral, water temp HIGH, oil pressure.
Note that some of the indicator lights on instruments with 4 or 5 LEDs are multi-functional.

Another big advantage is the fool-proof installation. The original connector is used, and the cables for the instrument and indicator lights are connected to the terminals of the mo.tri with color codes. No soldering or cable detection. No changing the wiring harness. No voiding the vehicle warranty.
This simple installation is almost Plug and Play. It saves time ...and money.

Currently, the models listed above are available. Further models/years will gradually follow.
Please select your model and its model year. Please note that the model year is not necessarily identical to the year of manufacture!
Identify the 11th digit from the left on the VIN number; this number/letter will give you the model year.

A = 2010

B = 2011

C = 2012

D = 2013

etc.

Dimensions: Length/ Width/ Height: 42 mm/ 42 mm/ 27 mm

Scope of delivery: mo.tri adapter; connector (matching the model selected); end ferrules; 2x M3 screws; cable holder; cable ties.

The mo.tri will work with the motoscope tiny series, motoscope mini and the classic series.
It does not work with the motoscope pro.