- Fitting - F1: You have not set this item
- Fitting - F2: You have not set this item
- Fitting - F3: You have not set this item
- Length A: You have not set this item
- Length B: You have not set this item
- Length C: You have not set this item
Fitting F1, choose from banjo fittings or compression fittings accordingly
-
Swivel internal thread M10 x 1.00
90 Degrees, cone 90 degrees convex
X = 7.7mm, D = 13.5mm, wrench size = 14mm
Available in stainless steel.
Learn More -
Swivel internal thread M10 x 1.00
90 Degrees, cone 90 degrees convex
X = 8mm, D = 15.8mm, wrench size = 17mm
Available in stainless steel.
Learn More -
Swivel internal thread M10 x 1.00
Straight, cone 120 degrees convex
X = 8mm, D = 13.5mm diameter, wrench size = 14mm
Available in aluminum.
Learn More
Choose your fitting types for the Spiegler Type 950/951 brake line. This brake line configuration is mostly chosen for front brake lines, automotive applications, side cars and trikes. You can choose between aluminum and stainless steel fittings. Please be aware that the stainless steel fittings are not available in colors. Add several lines to your quotation request. Our brake line diameter comes very close (slightly smaller) to the standard AN3 line diameter. All brake line components are either made in Europe or the US. You can depend on the finest materials. We are not using any carbon steel components; it is either stainless steel or anodized aluminum. The manifold type 951 gives you the option, utilizing a 6mm bolt, to mount it to a bracket or similar.
Grommets and Tab Locator:
X = 16 mm
D = 15 mm
X = 13.5 mm
D = 11.9 mm
(used in 20-00085-SS tab locator)
X = 22 mm
D = 17.8 mm
X = 14 mm
D = 12 mm
X = 41 mm
Y = 20 mm
Z = 21 mm
8 mm bolt hole
tab locator includes rubber grommet
Help us set up your quote.