• Newest Generation of Radial Clutch Master Cylinder from MAGURA powered with HCT - Hard Core Technology
• MAGURA Hard Core Technology (HCT) - The fully patented braking technology from MAGURA reduces the internal friction within the mater cylinder to improve the feeling at the lever. The slotted piston technology reproduces  a multi promary port master to ensure faster pressure balance in the event of an 'ABS Kickback'.
  
• 70 degree Full Radial Design - pushrod and cylinder at an right angle to the handlebar results in decreased friction and more direct feel at the lever for improved controlled braking.
• Full ABS Compatibility - MAGURA HCT is approved for continuous use with all ABS systems without loss of performance due to pressure compensation 'ABS Kickback'
• Advanced Secondary Seal Technology - The rear piston seal has been specially designed to prevent the intrusion of air through secondary seal ingress. The advanced X-Ring seal design will eliminate this problem common on race bikes at higher speeds.
• Reservoir and Mountig Bracket - The master cylinder is supplied with an external brake fluid reservoir and mounting bracket.
• Brake Light Switch - Pre installed brake or clutch switch and cable are included
• German Made and German TUV Approval
• Banjo Bolt - Banjo bolt and crush washer are included

Available piston diameters:

• Radial brake: 12mm (short lever); 15mm (long lever); 18mm (long lever)
• Radial clutch: 12mm (long lever); 13mm (long lever) DOT Fluid
• Radial clutch: 12mm (long lever); 13mm (long lever) Mineral Oil, suitable for BMW and KTM with mineral oil activation system